Manual & Parts Breakdown

We have most manuals with parts breakdowns for CM, Coffing, Budgit and Yale hoists online.  Let us know if you don’t see what you are looking for and we can help you out.

Learn more

Service Center

We have complete testing facilities and parts availability for all hoist manufacturers. Our factory trained mechanics know hoist repair.

Let us help

PE2

Download PDF Manual

PE2-lever-hoists.png


Part Look-Up / Order Form

ORDERING INFORMATION
The following information must accompany all correspondence or repair parts orders.

1) Puller capacity
2) Serial Number - this is stamped on the Puller frame (640-100 or 640-101).
For parts orders also specify

1 )Quantity desired
2) Key number of part
3) Part Name
4) Part number of the part
When ordering replacement parts, consideration should be given to the need to replace other items, (bushings, fasteners, etc.) and items that may be damaged or lost during disassembly or just unfit for future use because of deterioration from age or service.

Parts should be ordered from CM's Master Parts Depots conveniently located throughout the United States and Canada. Refer to the inside of the front cover of this manual to locate the Master Parts Depot nearest you.

WARNING
USING "COMMERCIAL" OR OTHER MANUFACTURER'S PARTS TO REPAIR THE CM PULLERS MAY CAUSE LOAD LOSS.
TO AVOID INJURY:
USE ONLY CM SUPPLIED REPLACEMENT PARTS. PARTS MAY LOOK ALIKE BUT CM PARTS ARE MADE OF SPECIFIC MATERIALS OR PROCESSED TO ACHIEVE SPECIFIC PROPERTIES.
KEY NO. NO. REQ'D. PART NAME PART NUMBER
CAPACITY - TONS
3/4 1-1/2 3 6
640-100 1 Frame with Bushings (3/4 Ton) 40684 -
640-101 1 Frame with Bushings (1 1/2-6 Tons) - 40695 40695
640-102 1 Frame Expansion Plug 940787 -
640-103 1 Stripper Screw 982688 -
640-104 2 Chain Guide Attaching Screw 987274 -
640-105 1 Stripper 40728 -
640-106 2 Gear Cover Screw - 982689
640-107 1 Chain Guide Attaching Screw - 982565
640-108 1 Friction Hub Key - 40917
640-109 1 Pinion Thrust Washer - 40789
640-110 1 Brake Cam Key 40824
640-111 1 Brake-Adjusting Nut 40785
640-112 1 Brake Adjusting Nut Cotter Pin 940805
640-113 2 Lever Cap Screw 982717
640-114 1 Liftwheel 40130 40140
640-115 1 Chain Guide 40698 24718
640-116 1 Liftwheel Bushing (Gear End) - 40816
640-117 1 Liftwheel Bushing (Brake End) - 40819
640-118 1 Pinion Shaft Bushing (Brake End) - 40818
640-119 1 Pinion Shaft Bushing (Pinion End) - 40819
640-120 1 Gear Cover - 40512 40513
640-121 1 Pinion Shaft - 40480
640-122 1 Friction Hub - 40446
640-123 2 Friction Washer 40904
640-124 1 Ratchet with Bushing 40662
640-125 1 Lever Ratchet Hub For Units Not Equipped With Load Limiter 40570
640-126 1 Brake Cam 40122
640-127 1 Lever Assembly (includes Lever, Expansion Plug, Limiter.Plunger, Plunger Spring, Spring Pin, Trigger and Trigger Pin 40663 For Units And Without Load Limiter.
40928 For Units With Load Limiter
640-128 1 Load Sentry Assembly 4096 4098
640-129 1 Ratchet Plunger 40517
640-130 1 Ratchet Plunger Spring 40742
640-131 1 Ratchet Plunger Spring Pin 983880
*640-132 1 Upper Hook Assembly (includes latch) 40601 40603 40605 40607
640-133 1 Upper Hook Nut or Collar 986383 40445 40382 940834
640-134 1 Upper Hook Pin 983768 45841 982335 983787
640-135 1 Upper Hook Washer 40736
640-136 1 Anchor Sling 4071 4072 -
640-137 1 Lever Cap 40576
640-138 1 Disc Spring 82297
640-139 1 End Ring 40471
640-140 1 Hoist Hanger - 40151 40171
640-141 1 Adapter Sleeve - 40790 -
640-142 1 Hanger Screw (3 Ton) - 982587 -
640-143 1 Hanger Screw Washer (3 Ton) - 940807 -
640-144 1 Dead End Pin (3 Ton) - 40851 -
640-145 1 Hoist Hanger Set Screw (3 Ton) - 986304 -
640-146 1 Hanger Screw (6 Ton) - 40500
640-147 1 Dead End Pin (6 Ton) - 40853
640-148 1 Bearing Retainer Snap Ring - 40740
640-149 1 Hanger Screw Washer (6 Ton) - 45930
640-150 1 Hanger Screw Nut (6 Ton) - 40383
640-151 1 Hanger Screw Nut Pin (6 Ton) - 983791
640-152 1 Upper Sheave - 40172
640-153 2 Upper Sheave Bearing - 88429
*640-154 1 Lower Hook Assembly (includes Latch) 40602 40604 -
640-155 1 Hook Block Drilled 40120 40142 -
640-156 1 Hook Block Tapped 40121 40143 -
640-157 1 Hook Block Screw 40854 40855 -
*640-158 1 Lower Hook Assembly (includes Latch) 40602 40604 -
640-159 1 Lower Hook Washer - 40606 40608
640-160 1 Lower Hook Nut - 40382 940834
640-161 1 Lower Hook Nut Pin - 982335 983787
640-162 3 Lower Hook Block Screw - 940812 -
640-163 3 Lower Hook Block Screw L.W. - 940830 -
640-164 3 Lower Hook Block Screw Nut - 945820 -
640-165 1 Reevinq Caution Plate - 45757 -
640-166 1 Lower Sheave Bearing Spacer - 40796
640-167 2 Bearing Retainer Snap Ring - 40740
640-168 2 Expansion Plug - 940737
640-169 1 Lower Sheave (3 Ton) - - 40166 -
640-170 2 Lower Sheave (6 Ton) - 40172
640-171 4 Sheave Bearing (6 Ton) - 88429
640-172 2 Lower Hook Block (3 Ton) - 40689 -
640-173 1 Lower Hook Block (6 Ton) - 40176
640-174 1 Load Chain (specify length required) 85839 85847
640-175 2 Latch Kit 45661 45662 45663 45665
640-176 1 Lever Plunger 40462
640-177 1 Lever Expansion Plug 940801
640-178 1 Lever Plunger Spring 40735
640-179 1 Lever Plunger Pin 983766
640-180 1 Lever Trigger 40113
640-181 1 Lever Trigger Pin 983768
640-183 1 Warning Label 40975
640-184 1 Ea. Operating Tag and Tie Order Tag 40976 and Tie 982979
640-200 1 Load Limiter Kit (Includes Lever) 4190 4191
640-201 1 Lever Ratehet Hub for Units Equipped with Load Limiters 40182
640-202 1 Capacity of CM Label - 40908 40907
* If Latchlok Hook is required, part numbers are: Upper Hook-1000 for 3/4 ton, 1002 for 1-1/2 ton, 1004 for 3 ton and 1027 for 6 ton. Lower Hook-1001 for 3/4 ton, 1003 for 1-1/2 ton, 1005 for 3 ton and 1007 for 6 ton.