KEY
NO. |
NO.
REQ'D. |
PART NUMBER |
PART
NUMBER |
| Rated
Load - Tons (Kg.) |
| 1/2(500) |
1(1000) |
2(2000) |
3(3000) |
5(5000) |
10(10000) |
| 622-1 |
1 |
Handwheel Cover with Studs |
22910 |
22791 |
22812 |
| 622-2 |
1 |
Handwheel |
22911 |
22792 |
22813 |
| 622-3 |
1 |
Brake Set (2 Friction Washers, Ratchet
and Hub) |
22912 |
22793 |
22814 |
| 622-4 |
1 |
Handwheel Side Plate (includes Bearing
Race, Pawl and Pawl Spring) |
22913 |
22794 |
22925 |
22931 |
22935 |
| 622-5 |
1 |
Cleared Side Plate (includes Bearing Race.
2 Bushings and 3 Studs. 2 Roller Shield Washers also provided
for 2, 3, 5 and 10 Ton) |
22914 |
22795 |
22926 |
22932 |
22936 |
| 622-6 |
1 |
Main Hardware Set (2 Gear Cover Nuts,
3 Handwheel Cover Nuts and Lockwashers, 6 Side Plate Nuts
and Lockwashers) |
22775 |
22796 |
22817 |
| 622-7 |
1 |
Gear Cover with Studs |
22915 |
22797 |
22818 |
| 622-8 |
1 |
Gear Set |
22916 |
22798 |
22819 |
| 622-9 |
1 |
Gear Set Roller Kit (48 Rollers for 1-Ton,
44 Rollers for 2, 3, 5 and 10 Ton) |
- |
22799 |
22820 |
| 622-10 |
1 |
Pinion Shaft |
22917 |
22800 |
22821 |
| 622-11 |
1 |
Pinion and Liftwheel Hardware Kit (Pinion
Shaft Nut, Cotter Pin and Liftwheel Snap Ring) |
22918 |
22801 |
22822 |
| 622-12 |
1 |
Liftwheel Roller Kit (66 Rollers for 1/2
Ton, 60 Rollers for 1 Ton, 70 Rollers for 2, 3, 5 and 10
Ton) |
22781 |
22802 |
22823 |
| 622-13 |
1 |
Liftwheel (includes 2 Bearing Races) |
22919 |
22803 |
22824 |
| 622-14 |
1 |
Stripper |
22920 |
22804 |
22825 |
| 622-15 |
1 |
Loose End Pin (includes 2 Cotter Pins) |
22921 |
22805 |
22927 |
| 622-16 |
1 |
Chain Guide Roller |
22922 |
22806 |
22827 |
| 622-17* |
1 |
Upper Hook Assembly (includes Hook with
Latch, Hook Block, Clevis Pin and Cotter Pin for 1/2, 1 and
2 Ton; Hook with Latch, Hook Block, Bearing Balls and Set
Screw for 3 and 5 Ton) |
22923 |
22807 |
22830 |
22836 |
22847 |
- |
| 622-18* |
1 |
Lower Hook Assembly (includes Hook with
Latch, Hook Block, Screw, Nut and Cotter Pin) |
22787 |
22808 |
22831 |
- |
- |
- |
| 622-19* |
2 |
Latch Kit (Latch, Spring and Rivet) |
22928 |
22929 |
22930 |
22933 |
22934 |
22937 |
| 622-20 |
1 |
Gear Cage with Bushings (includes 2 Roller
Shield Washers for 2, 3, 5 and 10 Ton) |
22924 |
22810 |
22829 |
| 622-21 |
- |
Load Chain (Specify Lift or Length Required.) |
85834 |
85959 |
85960 |
| 622-22 |
- |
Hand Chain (Specify Lift or Length Required.) |
85832 |
| 622-23 |
1 |
Warning Tube |
946735 |
| 622-24 |
1 |
Label Set (Capacity and Warning Labels
and 8 Drive Screws) |
22603 |
22604 |
22608 |
22609 |
22610 |
22611 |
| 622-25 |
1 |
Hand Chain Connecting Link |
661019 |
| 622-26 |
1 |
Dead End Kit (includes 2 Anchor Plates,
Stud, Nut and Cotter Pin) |
- |
- |
- |
22839 |
- |
| 622-28 |
1 |
Sheave Shaft |
- |
- |
- |
22841 |
- |
| 622-29 |
1 |
Sheave Wheel |
- |
- |
- |
22842 |
- |
| 622-30 |
1 |
Sheave Shaft Hardware Kit (29 Rollers
and 2 Snap Rings) |
- |
- |
- |
22843 |
- |
| 622-31 |
1 |
Lower Hook Assembly (includes Hook Block,
Hook with Latch, Bearing Balls, Set Screw and 2 Snap Rings) |
- |
- |
- |
22844 |
22850 |
- |
| 622-36 |
1 |
Hoist Hanger Kit (Hanger Pin and 2 Cotter
Pins) |
- |
- |
- |
- |
- |
22864 |
| 622-38 |
1 |
Dead End Kit (Stud, Nut and Cotter Pin) |
- |
- |
- |
- |
- |
22866 |
| 622-39 |
2 |
Friction Washer |
22867 |
22868 |
22869 |
| 622-40 |
1 |
Hoist Hanger Assembly (includes Hanger,
Sheave Wheel, Hook with Latch, Hook Block, Dead End Anchor,
Shafts and Snap Rings) |
- |
- |
- |
- |
- |
22938 |
| 622-41 |
1 |
Lower Hook Block Assembly (includes Hook
Block, Hook with Latch, Sheave Wheels, Shafts and Snap Rings) |
- |
- |
- |
- |
- |
22939 |
